Sure it would work.
I just updated a build description, to include GPIO pin numbers.
You need to find out what is RA-08h pinout…
Please let us know how it works.
Kris
Hi, Kris, does the new firmware only support E78 868ln22? E78 915ln22s is unavailable! I think the two models are different, but their operating frequencies are the same, 850MHZ-925MHZ, and the mcu is also the same
good afternoon, I saw you have a question about RA-08h There is a link to the manufacturer’s specification, the board is quite convenient in the ra-08h kit, it immediately has everything you need and it is possible to supply 5v directly from the flight controller. Are there any developments in this direction?
i tried it and it works perfectly.
I come from Vietnam
Cppm user just wait and see 😉
How about RA-08h board, its have same module, ASR6601 and SX1262 module in one board? Can I flash it with this QLRS?
Sure it would work.
I just updated a build description, to include GPIO pin numbers.
You need to find out what is RA-08h pinout…
Please let us know how it works.
Kris
Hi, where can I get ASR6601 MultiPrgrammer firmware?
filedropper.com link is broken – 404
try now 🙂
I’m really exited!
Hi, Kris, does the new firmware only support E78 868ln22? E78 915ln22s is unavailable! I think the two models are different, but their operating frequencies are the same, 850MHZ-925MHZ, and the mcu is also the same
HI,
I think that it should work, Today i tested with 470LN22S for 433MHz band and it seems to be working.
Are E78-433LN22S fully supported today?
Hi! I am interested does LoRa E31 433T33D, 2W module could be used on maximum power with QCZEK?
https://docs.ai-thinker.com/_media/lora/docs/ra-08h_kit_v1.1.0_specification_-20220308.pdf
good afternoon, I saw you have a question about RA-08h There is a link to the manufacturer’s specification, the board is quite convenient in the ra-08h kit, it immediately has everything you need and it is possible to supply 5v directly from the flight controller. Are there any developments in this direction?