SPort Telemetry Support is comming Posted on 2018-10-072018-10-07 By qczek First screens showing how mavlink -> sport could work (without any external hw).
18 thoughts on “SPort Telemetry Support is comming”
Can’t wait more for it! 😀 Primarily for RSSI and GPS coordinates.
ready for download 🙂
Please explain how to connect sport to lora module. What pin?
Just read http://qczek.beyondrc.com/qczek-lrs-433mhz-1w-lora-rc-link/qczek-lrs-sport-telemetry/
Hello. Make more channel range rssi (snr) in the channel. To work from 990 to 2000
Is the air side and ground side module connection the same with the Sport wire connected to the M0 pin?
Sorry i don’t get what you mean ?
Try to describe what is your goal, do you want to use s port telemetry connected to RX?
I’m trying to use qlrs with matek f411 fc running inav but having problems with getting sport telemetry working. I need to make sure the connections are correct before checking other things. Can I email you directly?
yes please, krzysztof dot kuczek at gmail dot com 🙂
Can you please assemble
for any (or both 1.0/6.0) HW ver of 100mW modules?
Thanks in advance.
Hello could you collect.
I think you can use the 868MHz version for 915Mhz modules, check the rcgroup, some tested it with success as far as i remember.
have a nice day
If you use 868 firmware. The frequency modules will remain 915 or will become 868?
you need to set it manually according to used modules
Hi qczek, Great Work.
This is Andrews from india.
i get only the SX1278 module
is there any way you can advice on the pinout with Stm8 Mcu so i can build one and enjoy.
but how are you going to connect it, it does not include MCU?